Search results for "layer structure"
showing 9 items of 9 documents
Airborne measurements of dust layer properties, particle size distribution and mixing state of Saharan dust during SAMUM 2006
2009
The Saharan Mineral Dust Experiment (SAMUM) was conducted in May/June 2006 in southern Morocco. As part of SAMUM, airborne in situ measurements of the particle size distribution in the diameter range 4 nm < Dp < 100 μm were conducted. The aerosol mixing state was determined below Dp < 2.5 μm. Furthermore, the vertical structure of the dust layers was investigated with a nadir-looking high spectral resolution lidar (HSRL). The desert dust aerosol exhibited two size regimes of different mixing states: below 0.5 μm, the particles had a non-volatile core and a volatile coating; larger particles above 0.5 μm consisted of non-volatile components and contained light absorbing material. In…
Syntheses, crystal structures, and magnetic properties of metal-organic hybrid materials of Mn(II)/Co(II): three-fold interpenetrated alpha-polonium-…
2014
Three new 1,4-phenylenediacrylate bridged Mn(II) and Co(II) complexes of molecular formulas {[Mn2(ppda)(phen)4(H2O)2](ppda)2(H2O)} (1), {[Co(ppda)- (dpyo)(H2O)3]·4(H2O)}n (2), and {[Co(ppda)(bpe)]·(0.5H2O)}n (3) [ppda = 1,4- phenylenediacrylate; phen = 1,10-phenanthroline; dpyo = 4,4′-dipyridyl N,N′-dioxide; bpe = 1,2-bis(4-pyridyl)ethane] have been synthesized and characterized by elemental analysis, IR spectra, single-crystal X-ray diffraction studies, and low-temperature magnetic measurements. The structural determination reveals that complex 1 is a discrete dinuclear species, 2 is a 1D polymeric chain, while 3 is a three-fold interpenetrated α-polonium network. Hydrogen-bonding interact…
Detection of disbonds in multilayer structures by laser-based ultrasonic technique
2008
Adhesively bonded multi-layer structures are frequently used, mostly in the aerospace industry, for their structural efficiency. Nondestructive evaluation of bond integrity in these types of structures, both after manufacturing and for periodic inspection during service, is extremely important. A laser-based ultrasonic technique has been evaluated for non-contact detection of disbonds in aluminum multi-layer structures. Two configurations have been used to detect disbonded areas: pitch-catch with unidirectional guided wave scan and through-transmission with bidirectional scan. Guided wave scanning was done with a laser line source and air-coupled transducer sensing at 500 kHz, 1 ;MHz, and 2…
Characterization of impervious layers using scale models and an inverse method
2009
We describe a novel procedure that uses an inverse method to determine unknown parameters for impervious layers used in multilayer structures. The proposed model of the multilayer structure is limited to an ideal double plate separated by an unbonded, fibrous, sound-absorbing material. Experimental data were obtained by nearfield acoustic holography for the calculation of the transmission loss of various multilayer structures mounted in a window in a wooden box designed specifically for this purpose. We used the Trochidis and Kalaroutis forecast model of acoustic insulation for multilayer structures, which is based on a spatial Fourier transform. The experimental pressure and velocity data …
Size-filtering effects by stacking InAs/InP (001) self-assembled quantum wires into multilayers
2002
Multilayer structure containing vertically stacked InAs/InP self-assembled quantum wires have been successfully grown by molecular-beam epitaxy. The influence of the InP spacer layer thickness on the structural and optical properties of the wire superlattice has been studied by means of transmission electron microscopy and photoluminescence. The coherent propagation of the strain field in the sample with a 5-nm-thick spacer determines by a size filtering effect a good homogeneity and uniformity of the wire stacks, and hence a good optical quality. The exciton recombination dynamics in the wire superlattice cannot be related to thermal escape of carriers out to the barriers, as occurs in sin…
Heterogeneous structures studied by an interphase elasto-plastic damaging model
2013
Heterogeneous materials present a mechanical response strongly dependent on the static and kinematic phenomena occurring in the constituents and at their joints. At the mesoscopic level the interaction between the units is simulated by mean of apposite mechanical devices such as the zero thickness interface model where contact tractions and displacement discontinuities are the primary static and kinematic variables respectively. In heterogeneous materials the response also depends on joint internal stresses. The introduction of internal stresses brings to the interphase model or an enhancement of the classical zero-thickness interface. With the term 'interphase' we shall mean a layer separa…
A beam finite element for magneto-electro-elastic multilayered composite structures
2012
Abstract A new finite element based upon an elastic equivalent single-layer model for shear deformable and straight magneto-electro-elastic generally laminated beam is presented. The element has six degrees of freedom represented by the displacement components and the cross-section rotation of its two nodes. The magneto-electric boundary conditions enter the discrete problem as work-equivalent forces and moments while the electro-magnetic state characterization constitutes a post-processing step. The element possesses the superconvergence property for the static problem of beams with uniform cross-section and homogenous material properties along the beam axis direction. Moreover, it is free…
Polystyrene nanoparticle-templated hollow titania nanosphere monolayers as ordered scaffolds
2018
We report a novel multi-step method for the preparation of ordered mesoporous titania scaffolds and show an illustrative example of their application to solar cells. The method is based on (monolayer) colloidal nanosphere lithography that makes use of polystyrene nanoparticles organised at a water–air interface and subsequently transferred onto a solid substrate. A titania precursor solution (titanium(IV) isopropoxide in ethanol) is then drop-cast onto the monolayer and left to “incubate” overnight. Surprisingly, instead of the expected inverse monolayer-structure, a subsequent calcination step of the precursor yields an ordered monolayer of hollow titania nanospheres with a wall thickness …
rac-1,1,1,6,6,6-Hexachlorohex-3-yne-2,5-diol hemihydrate
2017
The asymmetric unit of the title compound, C6H4Cl6O2·0.5H2O, contains one molecule of 1,1,1,6,6,6-hexachlorohex-3-yne-2,5-diol and half a water molecule located on a twofold rotation axis. In the crystal, pairs of hexachlorohexynediol molecules form centrosymmetric dimers connectedviapairwise O—H...O hydrogen bonds. These dimers are connected by water molecules, resulting in layers parallel to theabplane.